[MBZ] In Tank Fuel Filter

[R A Bennell]

Isn't this the plug that folks used a sparkplug socket on, upside down? There was a thread on this a long while
back. The gist of it was that the upper part of some spark plug sockets is the correct size to fit the plug on the
tank. Pull the rubber thing out of the socket and put the extension in from the wrong end and it will then permit
you to use the socket in a way never intended.

Randy B

-----Original Message-----
From: Mercedes-bounces at striplin.net
[mailto:Mercedes-bounces at striplin.net]On Behalf Of John Berryman
Sent: Monday, May 29, 2006 10:17 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] In Tank Fuel Filter



On May 29, 2006, at 10:52 AM, Dan & Sandy Steadman wrote:

> I need to know the best way to get the filter out. I
> don't have a wrench or socket that will fit the filter.
>
> Any tricks or suggestions?

	Buy or borrow the correct tool. Using a hammer and chisel is not
recommended, especially on gas tanks.

>
> Thanks,
> Dan Steadman

Johnny B.
I Mac Therefore I am