[MBZ] CA-spec '85 300D transmission?

[Kaleb C. Striplin]

that Im not 100% sure of.  It wont have to be from a turbo though, the 
190D/E etc all used the 722.4, which should work on either model but not 
sure about the bell housing going from the 201 to the 123, not sure if 
its the same exactly.

tom savage wrote:

> Kaleb C. Striplin wrote:
> 
>>Yes, the CA uses the 722.4, and I THINK, but am not sure, that you can 
>>use one out of a 190.  In any event, the 85 version 722.3 can be used in 
>>place of the CA 722.4
> 
> 
> Oh really?  This is good to hear.  So an OM60x has the same bellhousing 
> as an OM 61x?  Does the 201 transmission need to be from a turbo?  If 
> so, I guess a 124 trans might work, too.  Interesting to note that the 
> 722.3 transes had 040 torque ratings (or whatever) while the .4 units 
> are 020.
> 
> Speaking of parts interchange, I learned today that the Gullwing, 
> Porsche 356, and 404 Unimog all use the same gas cap.  Big sucker, too.
> 
> Thanks guys,
> Tom
> 
> _______________________________________
> http://www.striplin.net
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email okiebenz at striplin.net
> 
> To Unsubscribe or change delivery options go to:
> http://striplin.net/mailman/listinfo/mercedes_striplin.net
> 
> 
> 

-- 
Kaleb C. Striplin/Claremore, OK
  91 300D 2.5 Turbo, 90 420SEL, 89 560SEL, 87 420SEL, 87 300SDL,
  85 380SE, 85 300D, 84 190D 2.2, 83 300TD, 81 300TD, 81 240D,
  76 240D, 76 300D, 74 240D, 73 280SEL 4.5, 72 250C, 69 250
http://www.striplin.net